Population-based study of environmental heavy metal exposure and hearing loss: A systematic review and meta-analysis.

Background and Objectives: Previous studies have shown an association between environmental exposure to heavy metals and hearing loss. However, the findings regarding the relationship between exposure to different metals and hearing loss development are inconsistent. To address this, we conducted a meta-analysis to explore the link between common heavy metal exposures and hearing loss. This study examined the effects of lead (Pb), cadmium (Cd), and mercury (Hg) pollution on hearing loss at various levels, and systematically reviewed the literature on manganese (Mn), barium (Ba), arsenic (As), and hearing loss. Methods: We conducted systematic searches in five major databases, including PubMed, Web of Science, Embase, Cochrane Library, and Scopus. In addition, we searched three Chinese digital libraries: CNKI, Wanfang Data, and Wipu. From an initial pool of 649 articles, we carefully screened and selected 15 articles for further analysis. The effect sizes from these selected studies were synthesized through a meta-analysis to calculate the overall effect size. Results: Our findings showed that: (1) There was a significant association between Pb and Cd exposure and hearing loss; (2) There is a proportional relationship between the increase of metal index detected in blood and hearing loss; (3) In the PTA measurement of hearing loss at different frequencies, the 4 kHz high frequency range had a stronger correlation with hearing loss than the low frequency, with OR 1.44 (1.22, 1.71); and (4) There was a more significant correlation between Barium (Ba) levels in nails and hair than in urine. Conclusions: The study presented evidence of a significant association between human hearing loss and exposure to lead (Pb) and cadmium (Cd). It not only revealed a positive correlation between blood heavy metal concentrations and the incidence of hearing loss but also highlighted that long-term exposure indicators of heavy metals were more indicative of the correlation with hearing loss. Lastly, the study recommends utilizing high frequency 4 kHz for the effective assessment and diagnosis of hearing loss caused by exposure to heavy metals.

Removal of cadmium and cobalt from water by Slovak bentonites: efficiency, isotherms, and kinetic study.

Slovak bentonite was used as an effective natural adsorbent for the removal of Cd(II) and Co(II). Characterization of the samples was conducted using X-ray diffraction (XRD), high-resolution scanning electron microscopy with an X-ray energy dispersion spectrometer (SEM-EDS), and infrared spectroscopy (FT-IR). Adsorption experiments were carried out for pure water and artificial seawater, each containing cobalt and cadmium cations within the concentration range of 5-60 mg/L. The highest bentonite adsorption capacities of the tested bentonites were 23.5 (Cd) and 32.2 (Co) mg g-1. The kinetics data revealed that, in addition to chemisorption, intraparticle diffusion contributes to metal removal. The physical and structural properties of bentonites play an important role in adsorption. Bentonite P 135 from the Lieskovec deposit showed the highest efficiency for removing both ions, with removal percentages exceeding 90% and 77.5% for pure water and artificial seawater, respectively. The results indicate the suitability of using Slovak bentonites as an alternative sorbent for both metal extractions. The mechanism of metal ion adsorption on bentonite clay can be understood through surface complexation and ion exchange. The examined bentonite deposits show potential as promising natural sorbents for the removal of cobalt and cadmium cations from polluted waters.

Enhancing the degradation rate and biomineralization nature of antiferromagnetic Fe-20Mn alloy by groove pressing.

The Fe-Mn alloys are potential candidates for biodegradable implant applications. However, the very low degradation rates of Fe-Mn alloys in the physiological environment are a major disadvantage. In this study, the degradation rate of a Fe-20Mn alloy was improved using the groove pressing (GP) technique. Hot rolled sheets of 2 mm thickness were subjected to GP operation at 1000°C. Uniform fine-grained (UFG) Fe-Mn alloys were obtained using the GP technique. The influence of GP on the microstructure, mechanical properties, degradation behavior in simulated body fluid (SBF), surface wettability, biomineralization, and cytocompatibility was investigated and compared to the annealed (A Fe-Mn) and rolled (R Fe-Mn) sample. The groove-pressed Fe-Mn (G Fe-Mn) alloy had a grain size of approximately 40 ± 16 µm whereas the A Fe-Mn and R Fe-Mn samples had grain sizes of 303 ± 81 and 117 ± 14.5 µm, respectively. Enhanced strength and elongation were also observed with the G Fe-Mn sample. The potentiodynamic polarization test showed the highest Icorr, lowest polarization resistance, and lowest Ecorr for the G Fe-Mn sample among all other samples indicating its higher degradation rate. The weight loss data from immersion tests also shows that the percentage of weight loss increases with time indicating the accelerated degradation behavior of the sample. The static immersion test showed an enhancement in weight loss of 0.46 ± 0.02% and 1.02 ± 0.05% for R Fe-Mn and G Fe-Mn samples, respectively, than A Fe-Mn sample (0.31 ± 0.03%) after 56 days in immersion in SBF. The greater biomineralization tendency in UFG materials is confirmed by the G Fe-Mn sample's stronger hydroxyapatite deposition. When compared to the A Fe-Mn and R Fe-Mn samples, the G Fe-Mn sample has a better wettability, which promotes higher cell adhesion and vitality, showing higher biocompatibility. This study demonstrates that Fe-20Mn processed by GP has potential applications for the manufacture of biodegradable metallic implants.

Water and sediment chemistry drivers of chlorophyll-a dynamics within a Ramsar declared floodplain pan wetland system.

Floodplain pans are hydrologically dynamic in nature and characterised by variables such as chlorophyll-a (chl-a), water, and sediment chemistry over their hydroperiods. The present study investigated the spatio-temporal variations in water and sediment physico-chemical, and chlorophyll-a concentration characteristics of six floodplain pans found in the Ramsar declared Makuleke wetlands, Kruger National Park, South Africa. The water and sediment physico-chemical variable values were generally elevated during the high-water period, whereas chlorophyll-a concentrations varied across pans and hydroperiod. Benthic chl-a concentration significantly varied across pans with concentrations ranging from 161 to 1036.2 mg m2. The two-way ANOVA showed significant differences in benthic chl-a concentration among hydroperiods, and no significant differences were observed in pelagic chl-a across pans and hydroperiods. Generally, pelagic and benthic chl-a concentration increased as water and sediment chemistry variables increased. Furthermore, three sediment variables, i.e. pH, calcium, and magnesium, and water conductivity were found to be significant in structuring benthic chlorophyll-a dynamics in pans. However, none of the sediment and water variables had a significant effect on pelagic chl-a. Hydroperiod had a significant effect on influencing chl-a concentration, with high and low water level periods being characterised by low and high chl-a concentration, respectively. The n-MDS results showed strong overlaps in chl-a biomass among the Makuleke floodplain pans across hydroperiods. The increasing chl-a concentration in these floodplain pans due to potential bioturbation effects as a result of large mammals could potentially lead to eutrophication, which in turn could affect the system's primary productivity and aquatic biota. Therefore, it is important to establish a continuous monitoring programme on these pans to inform sound management decisions.

Health risk assessment of heavy metals in some vegetables-Erbil City-Kurdistan Region of Iraq.

Heavy metals can have significant impacts on human health due to their toxicity and potential to accumulate in the body over time. Some heavy metals, such as lead, cadmium, mercury, and arsenic, are particularly harmful even at low concentrations. The estimation of hazards of vegetable intake to human health as well as explore the of heavy metals accumulation in different vegetables (cucumbers, tomato, eggplant, and bell peppers) collected in Erbil city from different source locally and imported from nearby country are conducted. The heavy metals concentration (cooper, zinc, lead and cadmium) was measured and analyzed by inductively coupled plasma-optical emission spectrophotometry. The maximum concentration of Pb was 27.95 mg/kg and the minimum was 6.49 mg/kg; for Cd, the concentration was 1.43 and 0.99 mg/kg, 74.94 and 5.14 mg/kg for Zn; and for Cu, the result was 56.25 and 8.2 mg/kg for the maximum and minimum, which they are within limits described by Food Agricultural Organization, but more than health limits and health risks calculated by mean of hazard quotient (HQ) techniques for Cu and Pb which they are more than 1. The local sample that collected in Erbil city show less concentration of heavy metals and low HQ in comparison with imported samples. The carcinogenic risk study shows elevated risk of accumulative consuming of edible part of those plant which they exceed the permissible limit that is 10-6.

Are organics more nutritious than conventional foods? A comprehensive systematic review.

The growing consumer interest fueled by the belief in the superiority of organic foods raises questions about their actual nutritional superiority over conventional ones. This assumption remains a controversial issue. The present study addresses scientific evidence to clarify this controversy and provide relevant insights for informed decision-making regarding dietary choices. We collected 147 scientific articles containing 656 comparative analyses based on 1779 samples of 68 vegetable, fruit, and other (cereals, pulses, etc.) foods, 22 nutritional properties, and nine residues. Results show that in 191 (29.1%) comparisons, there were significant differences between organic and conventional foods. In a similar quantity of cases (190; 29.0%), there were divergences in the results since some studies reported significant differences while others did not. Finally, most of the comparative analyses (275; 41.9%) showed no significant difference between organic and conventional foods. Therefore, the results herein show no generalizable superiority of organic over conventional foods. Claims for nutritious advantages would eventually be applied to specific comparisons, depending on the food type and nutritional parameter.

Recent development and future application of biodegradable ureteral stents.

Ureteral stenting is a common clinical procedure for the treatment of upper urinary tract disorders, including conditions such as urinary tract infections, tumors, stones, and inflammation. Maintaining normal renal function by preventing and treating ureteral obstruction is the primary goal of this procedure. However, the use of ureteral stents is associated with adverse effects, including surface crusting, bacterial adhesion, and lower urinary tract symptoms (LUTS) after implantation. Recognizing the need to reduce the complications associated with permanent ureteral stent placement, there is a growing interest among both physicians and patients in the use of biodegradable ureteral stents (BUS). The evolution of stent materials and the exploration of different stent coatings have given these devices different roles tailored to different clinical needs, including anticolithic, antibacterial, antitumor, antinociceptive, and others. This review examines recent advances in BUS within the last 5 years, providing an in-depth analysis of their characteristics and performance. In addition, we present prospective insights into the future applications of BUS in clinical settings.

Dinuclear Rhenium(I) Tricarbonyl Complexes as Anticancer Drug Candidates.

Cancer is one of the deadliest diseases worldwide. Chemotherapy remains one of the most dominant forms for anticancer treatment. Despite their clinical success, the used chemotherapeutic agents are associated with severe side effect and pharmacological limitations. To overcome these drawbacks there is a need for the development of new types of chemotherapeutic agents. Herein, the chemical synthesis and biological evaluation of dinuclear rhenium(I) complexes as potential chemotherapeutic drug candidates are proposed. The metal complexes were found to be internalized by an energy dependent endocytosis pathway, primary accumulating in the mitochondria. The rhenium(I) complexes demonstrated to induce cell death against a variety of cancer cells in the micromolar range through apoptosis. The lead compound showed to eradicate a pancreatic carcinoma multicellular tumor spheroid at micromolar concentrations.

Xanthan gum-capped Chromia Nanoparticles (XG-CrNPs): A promising nanoprobe for the detection of heavy metal ions.

The present study reports on the selective and sensitive detection of metals using xanthan gum-capped chromia nanoparticles (XG-CrNPs). The nanoparticles were synthesized by the chemical reduction method using sodium borohydride and xanthan gum as the reducing and capping agents, respectively. The synthesis of XG-CrNPs was confirmed by the appearance of the two absorption peaks at 272 nm and 371 nm in the UV-visible region. The nanoparticles have been extensively characterized by FTIR, TEM-EDX, XRD, and TGA analyses. The well-dispersed XG-CrNPs exhibited a quasi-spherical structure with an average particle size of 3 nm. A significantly low amount (2 µg/L) of XG-CrNPs was used for selective and sensitive detection of heavy metal ions. It showed excellent metal detecting properties by quenching its band gap signal which was extraordinarily conspicuous for Co(II), Hg(II), and Cd(II) in comparison to other metal ions like Ag(I), Ba(II), Mg(II), Mn(II), Ni(II), and Zn(II). The limit of detection of Co(II), Cd(II), and Hg(II) with this nanoprobe was found to be 2.167 µM, 1.065 µM, and 0.601 µM respectively. The nanoparticles manifested higher shelf-life and can be reused up to three consecutive cycles where most of its activity was conserved even after being used. Thus, it may find use in metal sensor devices for the detection of hazardous metals.

Effects of multiple metals exposure on abnormal liver function: The mediating role of low-density lipoprotein cholesterol.

Equilibration of metal metabolism is critical for normal liver function. Most epidemiological studies have only concentrated on the influence of limited metals. However, the single and synergistic impact of multiple-metal exposures on abnormal liver function (ALF) are still unknown. A cross-sectional study involving 1493 Chinese adults residing in Shenzhen was conducted. Plasma concentrations of 13 metals, including essential metals (calcium, copper, cobalt, iron, magnesium, manganese, molybdenum, zinc, and selenium) and toxic metals (aluminum, cadmium, arsenic, and thallium) were detected by the inductively coupled plasma spectrometry (ICP-MS). ALF was ascertained as any observed abnormality from albumin, alanine transaminase, aspartate transaminase, γ-glutamyl transpeptidase, and direct bilirubin. Diverse statistical methods were used to evaluate the single and mixture effect of metals, as well as the dose-response relationships with ALF risk, respectively. Mediation analysis was conducted to evaluate the role of blood lipids in the relation of metal exposure with ALF. The average age of subjects was 59.7 years, and 56.7 % were females. Logistic regression and the least absolute shrinkage and selection operator (LASSO) penalized regression model consistently suggested that increased levels of arsenic, aluminum, manganese, and cadmium were related to elevated risk of ALF; while magnesium and zinc showed protective effects on ALF (all p-trend < 0.05). The grouped weighted quantile sum (GWQS) regression revealed that the WQS index of essential metals and toxic metals showed significantly negative or positive relationship with ALF, respectively. Aluminum, arsenic, cadmium, and manganese showed linear whilst magnesium and zinc showed non-linear dose-response relationships with ALF risk. Mediation analysis showed that LDL-c mediated 4.41 % and 14.74 % of the relationship of plasma cadmium and manganese with ALF, respectively. In summary, plasma aluminum, arsenic, manganese, cadmium, magnesium, and zinc related with ALF, and LDL-c might underlie the pathogenesis of ALF associated with cadmium and manganese exposure. This study may provide critical public health significances in liver injury prevention and scientific evidence for the establishment of environmental standard.

Identification of high lead exposure locations in Ohio at the census tract scale using a generalizable geospatial hotspot approach.

BACKGROUND: Lead is a persistent, ubiquitous pollutant whose historical sources have been largely addressed through regulation and voluntary actions. The United States (U.S.) has achieved significant decreases in children's blood lead levels (BLL) over the past 40 years; however, there is no known safe level of Pb exposure. Some communities continue to be disproportionately impacted by exposure to Pb, including Black children and families living in older homes. OBJECTIVE: To identify Ohio (OH) census tracts with children exposed to Pb and evaluate potential exposure determinants. METHODS: We obtained individual children's blood Pb data from 2005-2018 in OH. The percent of children with elevated BLL (EBLL) was calculated for OH census tracts using three blood Pb reference values (3.5, 5, and 10 µg/dL). Getis-Ord Gi* geospatial hotspot or top 20th percentile methodologies were then applied to identify "hotspots." Findings across multiple time periods and blood Pb reference values were evaluated and compared with existing Pb exposure indices and models. RESULTS: Consistency was observed across different blood Pb reference values, with the main hotspots identified at 3.5 µg/dL, also identified at 5 and 10 µg/dL. Substantial gains in public health were demonstrated, with the biggest decreases in the number of census tracts with EBLL observed between 2008-2010 and 2011-2013. Across OH, 355 census tracts (of 2850) were identified as hotspots across 17 locations, with the majority in the most populated cites. Generally, old housing and sociodemographic factors were indicators of these EBLL hotspots. A smaller number of hotspots were not associated with these exposure determinants. Variables of race, income, and education level were all strong predictors of hotspots. IMPACT STATEMENT: The Getis-Ord Gi* geospatial hotspot analysis can inform local investigations into potential Pb exposures for children living in OH. The successful application of a generalizable childhood blood Pb methodology at the census tract scale provides results that are more readily actionable. The moderate agreement of the measured blood Pb results with public Pb indices provide confidence that these indices can be used in the absence of available blood Pb surveillance data. While not a replacement for universal blood Pb testing, a consistent approach can be applied to identify areas where Pb exposure may be problematic.

Adsorption properties and mechanism of Cu(II) on virgin and aged microplastics in the aquatic environment.

Microplastics (MPs) migrate by adsorbing heavy metals in aquatic environments and act as their carriers. However, the aging mechanisms of MPs in the environment and the interactions between MPs and heavy metals in aquatic environments require further study. In this study, two kinds of materials, polyamide (PA) and polylactic acid (PLA) were used as target MPs, and the effects of UV irradiation on the physical and chemical properties of the MPs and the adsorption behavior of Cu(II) were investigated. The results showed that after UV irradiation, pits, folds and pores appeared on the surface of aged MPs, the specific surface area (SSA) increased, the content of oxygen-containing functional groups increased, and the crystallinity decreased. These changes enhanced the adsorption capacity of aged MPs for Cu(II) pollutants. The adsorption behavior of the PA and PLA MPs for Cu(II) conformed to the pseudo-second-order model and Langmuir isotherm model, indicating that the monolayer chemical adsorption was dominant. The maximum amounts of aged PA and PLA reached 1.415 and 1.398 mg/g, respectively, which were 1.59 and 1.76 times of virgin MPs, respectively. The effects of pH and salinity on the adsorption of Cu(II) by the MPs were significant. Moreover, factors such as pH, salinity and dosage had significant effects on the adsorption of Cu(II) by MPs. Oxidative complexation between the oxygen-containing groups of the MPs and Cu(II) is an important adsorption mechanism. These findings reveal that the UV irradiation aging of MPs can enhance the adsorption of Cu(II) and increase their role as pollutant carriers, which is crucial for assessing the ecological risk of MPs and heavy metals coexisting in aquatic environments.

Multiple Prenatal Exposures and Acute Care Clinical Encounters for Asthma among Children Born to Mothers Living near a Superfund Site.

Prenatal exposures are associated with childhood asthma, and risk may increase with simultaneous exposures. Pregnant women living in lower-income communities tend to have elevated exposures to a range of potential asthma risk factors, which may interact in complex ways. We examined the association between prenatal exposures and the risk of childhood asthma acute care clinical encounters (hospitalization, emergency department visit, observational stay) using conditional logistic regression with a multivariable smooth to model the interaction between continuous variables, adjusted for maternal characteristics, and stratified by sex. All births near the New Bedford Harbor (NBH) Superfund site (2000-2006) were followed through 2011 using the Massachusetts Pregnancy to Early Life Longitudinal data system to identify children ages 5-11 with asthma acute care clinical encounters (265 cases among 7,787 with follow-up). Hazard ratios (HRs) were higher for children living closer to the NBH with higher cord blood Pb levels than children living further away from the NBH with lower Pb levels (P<0.001). HRs were highest for girls (HR=4.17, 95% CI: 3.60, 4.82) compared to boys (HR=1.72, 95% CI: 1.46, 2.02). Our results suggest that prenatal Pb exposure in combination with residential proximity to the NBH is associated with childhood asthma acute care clinical encounters.

How does plastic compare with alternative materials in the packaging sector? A systematic review of LCA studies.

In the recent years, packaging made of conventional plastics has been increasingly replaced by materials believed to be more sustainable. However, perceived sustainability must align with scientific assessments, such as life cycle assessments (LCAs). This review analysed 53 peer-reviewed studies published in the time range 2019-2023, aiming at understanding the state of the art in LCA about the environmental impacts of packaging by focusing on the comparison between plastics and alternative materials. The literature showed that consumer perceptions often differ from LCA findings and revealed that, frequently, conventional plastics are not the least environmentally friendly choice. Bioplastics typically show benefits only in the climate change and the fossil resource depletion impact categories. The heavy weight of glass turns out to affect its environmental performances with respect to the light plastics, with reuse being an essential strategy to lower the burdens. The comparison between plastics and metals is more balanced, leaning more towards plastics for food packaging. Similarly, article resulted often preferable than plastics. Finally, for the other materials (i.e. wood and textiles), the picture is variable. To be competitive with plastics, the alternative materials require improvements like the optimisation of their production processes, their reuse and enhanced end-of-life options. At the same time, recycled polymers could boost the eco-performance of virgin plastics.

Coordination of a Phosphine-Tethered Aminoborane to Group 10 Metals.

While π-complexes of C=C bonds are ubiquitous in organometallic chemistry, analogous complexes of the isoelectronic but strongly polarized B=N double bond of aminoboranes are extremely scarce. To address this gap, a diphosphine-aminoborane ligand (PhDPBAiPr) is introduced and its coordination with group 10 metals is investigated. The B=N bond does not coordinate to the metal in Pt(0) and Pd(II) complexes. In contrast, side-on coordination of the B=N bond is observed in the Ni(0) complex [PhDPBAiPr]Ni(NCPh), and the X-ray crystal structure reveals B-N bond elongation compared to the free ligand. The choice of co-ligand strongly influences the presence or absence of side-on coordination at Ni(0) as evidenced by NMR spectroscopy. While the B=N π-complex is geometrically similar to C=C analogues, a bonding analysis reveals that the interaction of the B=N motif with the electron-rich Ni(0) center is best described as 3c4e hyperbond, in which Ni and N are competing for the empty orbital on B.

Impact of temperature and residence time on sewage sludge pyrolysis for combined carbon sequestration and energy production.

Environmental challenges related to sewage sludge call for urgent sustainable management of this resource. Sludge pyrolysis might be considered as a sustainable technology and is anticipated to support measures for mitigating climate change through carbon sequestration. The end products of the process have various applications, including the agricultural utilization of biochar, as well as the energy exploitation of bio-oil and syngas. In this research, sewage sludge was pyrolyzed at 500 °C, 600 °C, 750 °C, and 850 °C. At each temperature, pyrolysis was explored at 1hr, 2hrs, and 3hrs residence times. The ratio (H/Corg)at was tapped to imply organic carbon stability and carbon sequestration potential. Optimum operating conditions were achieved at 750 °C and 2hrs residence time. Produced biochar had (H/Corg)at ratio of 0.54, while nutrients' contents based on dry weight were 3.99%, 3.2%, and 0.6% for total nitrogen (TN), total phosphorus (TP), and total potassium (TK), respectively. Electrical conductivity of biochar was lesser than the feed sludge. Heavy metals in biochar aligned with the recommended values of the International Biochar Initiative. Heat content of condensable and non-condensable volatiles was sufficient to maintain the temperature of the furnace provided that PYREG process is considered. However, additional energy source is demanded for sludge drying.

Recent advances and progress on the design, fabrication and biomedical applications of Gallium liquid metals-based functional materials.

Gallium (Ga) is a well-known liquid metals (LMs) that possesses the features, such as fluidity, low viscosity, high electrical and thermal conductivity, and relative low toxicity. Owing to the weak interactions between Ga atoms, Ga LMs can be adopted for fabrication of various Ga LMs-based functional materials via ultrasonic treatment and mechanical grinding. Moreover, many organic compounds/polymers can be coated on the surface of LMs-based materials through coordination between oxidized outlayers of Ga LMs and functional groups of organic components. Over the past decades, different strategies have been reported for synthesizing Ga LMs-based functional materials and their biomedical applications have been intensively investigated. Although some review articles have published over the past few years, a concise review is still needed to advance the latest developments in biomedical fields. The main context can be majorly divided into two parts. In the first section, various strategies for fabrication of Ga LMs-based functional materials via top-down strategies were introduced and discussed. Following that, biomedical applications of Ga LMs-based functional materials were summarized and design Ga LMs-based functional materials with enhanced performance for cancer photothermal therapy (PTT) and PTT combined therapy were highlighted. We trust this review article will be beneficial for scientists to comprehend this promising field and greatly advance future development for fabrication of other Ga LMs-based functional materials with better performance for biomedical applications.

Near-complete recycling of real mix electroplating sludge as valuable metals via Fe/Cr co-crystallization and stepwise extraction route.

In electroplating sludge, iron (Fe) and aluminum (Al) are common impurities that need to be separated before recycling valuable heavy metals. However, the traditional Fe/Al separation process often leads to significant losses of heavy metals. To address this issue, a new approach was developed to sequentially separate Fe/Al and recycle chromium (Cr) and nickel (Ni) from real electroplating sludge. The sludge contained 4.5% Cr, 1.2% Al, 1.1% Ni, and 14.6% Fe. Initially, the sludge was completely dissolved in a mixture of hydrochloric and nitric acids. The resulting acid solution was then heated to 160 °C for 10 h with the addition of saccharose. This hydrothermal treatment led to the hydrolysis and crystallization of 98.3% of Fe, 31.8% of Cr, 1.1% of Al, and 4.9% of Ni, forming akaganeite-bearing particles. It was observed that the excessive amount of saccharose also improved the removal of Cr, Al, and Ni, but decreased the removal of Fe. After the hydrothermal treatment, the remaining supernatant was adjusted to different pH levels (1.9, 2.9, and 4.5, respectively), and then Al, Cr, and Ni were stepwise extracted using di-(2-ethylhexyl) phosphate acid (P204). The recycling efficiencies achieved were 97.4% for Al, 61.2% for Cr, and 89.3% for Ni. This approach provides a promising method for the stepwise separation of Fe/Al and the recycling of heavy metals from electroplating sludge.

Using oral bioaccessibility measurements to refine risk assessment of potentially toxic elements in topsoils across an urban area.

Elevated concentrations of As, Cr, Cu, Ni, Pb, V and Zn in topsoils in Belfast, Northern Ireland have been found to exceed assessment criteria in the city and therefore may pose a risk to human health. Most generic assessment criteria (GAC) for potentially toxic elements (PTEs) in soils assume PTEs are 100% bioavailable to humans. Here we use in-vitro oral bioaccessibility testing using the Unified BARGE method (UBM) to measure what proportion of soil contamination dissolves in the digestive tract and therefore is available for absorption by the body. This study considers how PTE bioaccessibility in soils varies spatially across urban areas and refines human health risk assessment for these PTEs using site specific oral bioaccessibility results to present the first regional assessment of risk that incorporates bioaccessibility testing. A total of 103 urban soil samples were selected for UBM testing. Results showed low bioaccessible fraction (BAF) for the PTEs from geogenic sources: Cr (0.45-5.9%), Ni (1.1-46.3%) and V (2.2-23.9%). Higher BAF values were registered for PTEs from anthropogenic sources: As (8.0-86.9%), Cu (3.4-67.8%), Pb (9.1-106.2%) and Zn (2.4-77.5%). Graphs of bioaccessibility adjusted assessment criteria (BAAC) were derived for each urban land use type and PTE. These provide a visual representation of the significance of oral bioaccessibility when deriving BAAC and how this is affected by 1) dominant exposure pathways for each land use and 2) relative harm posed from exposure to PTEs via each pathway, allowing oral bioaccessibility research to be targeted to contaminants and pathways that most significantly impact risk assessment. Pb was the most widespread contaminant with 16.5% of sites exceeding the Pb GAC. Applying BAAC did not significantly change risk evaluation for these samples as many had Pb BAF>50%. In contrast, all samples that exceeded the As GAC were found to no longer exceed a minimal level of risk when oral bioaccessibility was considered. Oral bioaccessibility testing resulted in a 45% reduction in the number of sites identified as posing a potential risk to human health.

Molecular strategies of the pygmy grasshopper Eucriotettix oculatus adapting to long-term heavy metal pollution.

To study the heavy metal accumulation and its impact on insect exterior and chromosome morphology, and reveal the molecular mechanism of insects adapting to long-term heavy metal compound pollution habitats, this study, in the Diaojiang river basin, which has been polluted by heavy metals(HMs) for nearly a thousand years, two Eucriotettix oculatus populations was collected from mining and non-mining areas. It was found that the contents of 7 heavy metals (As, Cd, Pb, Zn, Cu, Sn, Sb) in E. oculatus of the mining area were higher than that in the non-mining 1-11 times. The analysis of morphology shows that the external morphology, the hind wing type and the chromosomal morphology of E. oculatus are significant differences between the two populations. Based on the heavy metal accumulation，morphological change, and stable population density, it is inferred that the mining area population has been affected by heavy metals and has adapted to the environment of heavy metals pollution. Then, by analyzing the transcriptome of the two populations, it was found that the digestion, immunity, excretion, endocrine, nerve, circulation, reproductive and other systems and lysosomes, endoplasmic reticulum and other cell structure-related gene expression were suppressed. This shows that the functions of the above-mentioned related systems of E. oculatus are inhibited by heavy metal stress. However, it has also been found that through the significant up-regulation of genes related to the above system, such as ATP2B, pepsin A, ubiquitin, AQP1, ACOX, ATPeV0A, SEC61A, CANX, ALDH7A1, DLD, aceE, Hsp40, and catalase, etc., and the down-regulation of MAPK signalling pathway genes, can enhanced nutrient absorption, improve energy metabolism, repair damaged cells and degrade abnormal proteins, maintain the stability of cells and systems, and resist heavy metal damage so that E. oculatus can adapt to the environment of heavy metal pollution for a long time.